Fivestar Activation Switch Replacement

	STEP BY STEP REPAIRS

Make sure that the machine is unplugged from the wall before beginning this repair.
Locate and Remove the two Phillips head screws securing the activation switch plate with a Phillips head screw driver.
Gently pull the switch plate away from the machine to expose the backside and electrical connectors.
Remove the nut and lockwashers holding the grounding wire in place.
Disconnect the wires from the activation switch, making note of which wire goes to which pole. Pull the switch forwards out of the switch plate.
Place the new switch back into the switch plate and replace the wires onto their correct poles.
Replace the screw, lockwashers, and grounding wire to the screw on the switch plate.
Replace the two Phillips head screws to secure the switch plate back onto the machine and complete the repair.

Click on any image to get a larger view.