Fivestar Carpet-Upholstery and Pump Switch Replacement

	STEP BY STEP REPAIRS

Make sure that the machine is unplugged from the wall before beginning this repair.
Locate and Remove the two Phillips head screws securing the switch plate with a Phillips head screw driver.
Gently pull the switch plate away from the machine to expose the backside and electrical connectors.
Remove the two nuts holding the retaining plate in place.
Pull the switch forwards out of the switch plate so that the wires are now going through the hole the switch was originally set in.
One at a time, remove the wires from the old switch, and place them on the correct pole of the new switch.
Place the new switch back into the switch plate and replace the retaining plate nuts.
Replace the two screws to secure the switch plate back onto the machine to complete the repair.

Click on any image to get a larger view.